操作工的简单英文自我评价

操作工的简单英文自我评价如何写呢？我们一起来看一看：

操作工的简单英文自我评价写作方法：1、首先可以写自己在工作期间的表现或感谢公司给予的平台；2、然后可以写自己的工作总结，包括工作态度、设备操作等方面；3、最后结尾部分可以写对自己未来的期望以及自己今后努力的方向。

In the twinkling of an eye, one year's work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.

Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so on.Three check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport certificate ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many shortcomings in these areas I got the company leadership, department heads and the squad leader of the correct guidance, The dragon is to carry out job training skills training, so that we have a better chance to improve their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.

In short, into the xx company has more than a year (in the car loading unit under the leadership of Master Ke) along the way, enjoy the pain over, but also the luxury of happiness, no credit also has elbow grease, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.

XX upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share 

In the past year, led by the leadership of the plant leadership led by the workers through the joint efforts of colleagues, and through their own positive efforts, as equipment maintenance workers I successfully completed his own work. I do a year on the work of a serious summary. The following is my summary of this year's work model essay:

First, the work attitude, ideological work

I am keen on my work, strict self-discipline, abide by the rules and regulations of the factory, strictly to the ball itself, put the work position, and always maintain a "modest, prudent, self-discipline, positive" attitude, guidance and guidance of colleagues in leadership With the help of always diligent study, proactive, and strive to improve themselves and always work hard, conscientiously complete the task, perform good job duties. Adhere to the ideals of building a good factory, a firm increase in workers' income beliefs. Continue to strengthen learning, a solid work of their own technology!

Second, do their own work

To do a mechanic, to deal with their own work to understand a clear, familiar and skilled their work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time.

To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaningMachine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work , The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough, Found, really inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I will try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling production .

For example, several engine-based experimental bench design, mobile engine rack, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not the previous test bench, the workshop down the task , We immediately accept, and actively to complete, from the concept to the leadership through the design intent, and then cutting the welding, production, and so on, until the engine is placed, commissioning, delivery, each engine model of the experiment Have to go through our first process, like the troops and horses do not move forage first, when a variety of engines in my production on the bench test, I feel very honored, thank the leadership to me such a platform, but also Feel the excitement of the results of our work, but also for our development in the manufacture of pride, but these will make me work harder, modest and prudent to learn from others, as much as possible to improve their ability to work themselves in their own Of the posts to play to the maximum effect, faster and more

Efficiency of the completion of their own work, but also enable us to get the maximum benefit units, so that my work and the harvest workers can achieve a balance, so I am more motivated, more confident work. Interpersonal relationships with other colleagues are also important because a person 's ability is limited and the success of everything depends on the collective wisdom. Therefore, it is the prerequisite for the successful completion of the tasks assigned by the leader to unite with the colleagues , This is not just work, usually life is also the case, so the unity of other colleagues is not only a personal thing is a duty to work!

I have a very good relationship with my colleagues, often help each other, because the mechanic I started only one, there is a maintenance worker, a good relationship, and I work with colleagues, I respect, at work, mutual cooperation , Is to improve the efficiency of a lot, for example, in the welding oil depot anti-theft window, the door of the test station in the production of sandblasting between the asbestos roof, give sandblasting between the welding air pipe, we collectively Homework, mutual cooperation, initiative, the task is completed very quickly, this is the power of unity, to play the power of everyone in order to make work progress faster. I deeply understand. In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the plant is the retirement of threading pipe.

Third, review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the negative factors in their work after the exclusion, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work. He must be able to do a good job.